Roborock S7 Sonic

Reminiscent of the previous generation Roborock S6 model when viewed from the outside, Roborock S7 comes with many innovations inside its body. One of the most striking innovations among the Roborock S7 features is VibraRise technology. Thanks to this technology, the robot vacuum cleaner can automatically perform floor separation successfully. So much so that while mopping is done with a wet mop on hard surfaces such as parquet, vacuuming mode is activated when moving to soft surfaces such as carpets. Thus, vacuuming and mopping functions are offered together, providing a high level of cleaning. Another benefit of this technology is that it eliminates the hassle of the user to remove and install the mop. Because when the wet mop is on the carpet, it pulls itself up to 5 mm and does not wet the carpet. Thus, the trouble of removing the mop from the vacuum cleaner and installing it is eliminated and the mop is constantly attached to the vacuum cleaner. The Roborock S7 has been developed to tackle the toughest stains. So much so that the smart vacuum cleaner, which has a brushing speed of 3000 times per minute, can overcome the most difficult stains, especially dried ones. So how is the situation on the carpet side? When the Roborock S7 is going to move from a hard surface such as parquet to the carpet, it switches to vacuuming mode and pulls the mop into it to prevent the carpet from getting wet. Then the motor with 2500 Pa suction power comes into play and wraps the floor and easily cleans the dirt and debris in the depths of the carpet.

The Roborock S7 performs all these cleaning functions automatically, unlike the previous models, instead of the cameras, the LiDAR sensor takes charge. LiDAR technology working using laser pulses; By sending laser beams to the object or surface whose distance is to be measured, it calculates the difference between the time these rays are sent and the time the reflection hits the object and reaches the source again, and can measure the distance. In this way, a three-dimensional map of the environment is produced. This means that the Roborock S7 maps better than its predecessor and the robot vacuum is much more sensitive to hitting obstacles like walls and furniture. The Roborock S7 gets the energy it needs for all these processes from a 5200 mAh battery. With the dimensions of 353 x 350 x 96.5 mm, the smart vacuum can clean for 3 hours when fully charged. Capable of performing wet and dry cleaning, the broom has a 470 ml dust chamber for vacuuming on soft surfaces such as carpets, and a 300 ml water tank for wet cleaning on hard floors such as parquet. Roborock S7 also comes with a silent mode feature for those who do not want loud noise. In this mode, the vacuum offers a quieter cleaning experience by slowing down the suction power and water discharge of the motor. After the Roborock S7 finishes the cleaning process, it automatically returns to the charging station. One of the outstanding features of the Roborock S7 is that it is compatible with virtual assistants. So much so that it is possible to give instructions by speaking to the vacuum cleaner, which supports Amazon Alexa, Google Assistant and Siri virtual assistants.